The Steps of Maintaining and Repairing Your Swimming Pool

pool installation in miamiOnce swimming pools are installed, homeowners need to maintain them in order to keep the water in them clean so that it is safe to swim. Failure to do proper maintenance can lead to costly repairs down the line. After pool installation in Miami is completed, follow these steps to maintain your pool so that you and your family and friends can enjoy it at all times.

Chlorinate and Shock Your Pool

Chlorine is what keeps swimming pools clean. It kills any harmful bacteria and disinfects the water after people have used it. As a result, you need to make sure your chlorine levels are in the right range throughout the swimming season. It should measure about 1 to 3 parts per million. After heavy use, you should consider “shocking” your pool with a shock product that will offer extra chlorination.

Use Test Strips to Check Chemical Levels

Outside of using chlorine, there are other chemicals that you will need to use to keep the pool balanced. You should pay close attention to the pH levels of your pool. You can do this by using inexpensive test strips that will tell you exactly how high or low the chemical levels in your pool are. You can then adjust your use of chemicals accordingly.

Brush the Pool Walls and Floor Every Week

Over time, the walls and floor of inground pools are going to get dirty. The key is to not allow them to get too dirty. You can do this by brushing them on a regular and by using a vacuum to suck up anything that makes its way to the bottom. Dirt, leaves, and other debris may gather there and cause problems down the line if they are not removed. They can also affect your water quality if you do not take care of them.

Skim the Pool

To prevent leaves, insects, and debris from making their way into your pool in the first place, use a skimmer to take them off the surface of your pool. Check your filter baskets regularly, too, and empty them as needed.

Categories: Pool Repair